KEG Towel Warmer Wall Mounted with Built-in Timer 4 Bars Electric Stainless Steel Heated Towel Racks for Bathroom, Hot Plug-in Bath Towel Heater Brushed Nickel

Towel Warmer Works great. Easy to install, really looks good and well made. It has a built in timer for 2 or 4 hours, I turn it on for 2 hours when I'm getting ready for a shower, Shave and take my shower the towel is dry and comfortable to use.I recommend this product.

We received and installed the warming towel bar and are so glad we did. The Husband seemed to have no problem with assembling and mounting the bar. We turn the bar on about 30 minutes or so before the evening showers and they warm up pretty quickly - it even seems to provide warmth in the bathroom with concrete floors - it is such a luxury to step out the shower to a nice warm towel. Figuring out the best wrap against the bars for our large bath towels but so far no matter the fold the towels are extra nice to use. We are using the 140 degree and turn the bar off every night. No more fluffing the towels through the dryer. Needless to say - we empty nesters are very happy with this purchase. Oh and it’s pretty too.

Looks good, could've been practical, but doesn't work, hung towel for over an hour, didn't warm the towel at all, however the bars were hot to touch. had purchased a bucket warmer from costco, it heat up the towel within 15-20 min/. Thought it would be a space saver, may be a wrong unit, returning. Tried another with larger surface area, that also no good either.

Generally pleased with the towel warmer so far. Seems to heat up nicely, and so far the timer appears to work. The product seems to be nicely manufactured, and the various joints between the bars are solid without any movement. It looks great on the wall, and the brushed finish is nice looking. The option for direct-wiring is nice, and they provide the required mounting plate and stand-off tube so the result is professional looking, but it does mean that the lower-right post is attached to the wall with a playing-card-sized metal plate that shows. To their credit, that plate has the same brushed finish.Taking away 1 star because of installation steps and instructions. None of these stopped me from success on the first try, but worth mentioning.1. The installation instructions are poorly written. They could easily have provided the measurements for the 4 mounting brackets, but they did not, so I had to measure carefully and then take a bit of a leap of faith in drilling the holes in the wall. It all worked out fine. As with everything, measure and check and re-check before making holes. Also would have been great if they had simply provided a paper template -- for the price of the product, they could have included 1 sheet of large paper with the holes marked.2. It is tricky to do the mounting for direct-wiring installation, because the wire is already in place. The wire gets in the way of taking pragmatic steps like test-fitting the mounting position, which was frustrating. Also, takes a bit of bravery, because the first step in the direct-wire instructions is to cut the plug off.3. The direct-wired installation requires that the right-side mountings must NOT be on a stud, since that is where the wire has to go through the drywall and into the wall cavity. Wires would have to go through the wall somewhere, of course, but was just bad luck that I had to move a bit off from my planned positioning to avoid a stud.4. As I saw written in other reviews, the simple dry-wall anchors (plastic sleeves) seemed guaranteed to not hold well enough or at least would not stand up to routine use for long. I used proper dry wall anchors instead, so the installation would be sturdy the first time.

KEG Towel Warmer Wall Mounted with Built-in Timer is very good!we like this product. It is perect fit for small bathroom! it is very convinient and works great!I would recomend this product.

The good part is that the towel rail comes with all the parts needed for plug in or hardwired installation. The hardwired kit comes with a facia plate to cover the wall box. It looks good but it has no bevelled edge so there is a gap between the plate and the wall due to the backing box mount. The plate cannot be installed with the radiator mounted because the rail obstructs access to the fixing screws. You need to leave sufficient power cord to enable the towel rail to be removed to fix the decorative cover plate first. You can then push the excess cable into the backing box before fixing the towel warmer in place. Manual control is simple ON or OFF with run times of 2,4 or 8 hours. Rail temperature is variable within a range of 100 to 140F. WiFi connection is simple and reliable but you need to use the 2.4GHz band. Programming is not user friendly. The unit comes with poor unreadable instructions that only cover establishing remote control. There is no instruction for setting up automatic turning on and off and the seller does not respond to requests for assistance. Eventually I figured out how to set up an automatic schedule only to find the app has a serious bug. Ther maximum rail temperature on auto control is 104F instead of the 140F that the product supports. Looks like a transposition error of the 4 and the 0 by a dyslexic programmer. As all these control apps use the same code the same fault exists in the Smart Life app and the TUYA app. I use BN-Link which uses the same code so no surprise that 104F was the maximum temperature I could set. Unfortunately 104F is a bit on the cool side for a towel warmer, so if you want to use automatic control this is not the product to buy until they fix the app. Thus only 4 stars.

This towel warmer works very well on thick towels. Instructions to install were very easy. Fits perfect on the bathroom wall. Timer is either 2 hours or 4 hours. 2 hours makes your towel perfect for when you are getting out of the shower. Highly recommend