Epoxy Resin 3.25 kg Fibreglass Kit | Professional Quality Clear & Odourless Lamination and Resin with Hardener and Gloves, incl. English Instructions

Easy to use - follow the instructions to the letter.Worked good on cold day and cured over 3 nights - really was cold but still hardened off. Used to protect outdoor plywood table tops.

Well my project for Covid -19 Lockdown was to put a jigsaw set in to a table top. This product was perfect.. Being new at using resin, and a lot of time watching Youtube, this product was easy to measure, mix and to use. Poured in with ease and not too many bubbles. We gave the product 3 days to set hard, but that was our choice, the remains in a small tub set just over an hour. Well we had enough of the resin and hardener left to do a second table with another puzzle. Both look great, many thanks.. Thats got me in the good books with the wife.

I absolutely love this resin, it's so easy to use. I measure 2:1 by weight and haven't had a single curing issue. It's very runny which is perfect for small delicate moulds to make sure you get into all the small spaces.Leave it to thicken for 20-30 minutes if you want a thick pour to add glitter or keep colours separate.I leave it for 5-10 minutes after mixing which I find helps remove almost all the bubbles. Just bought my second batch, it's great value and a great product!

This is the second lot I have brought and just want to share some observations-I use a mix of 100/46 which seems to work for me.Pro’sSuper easy to mix-I stir for 3 mins, rest it for 10, then I have a 20-30min to crack onNo real smell (though I always wear a mask and gloves)Comes away easily from even the cheap Chinese moulds you can buyFairly clearSuper cost effective-especially as I’m just getting into this as a hobby and still learningIt is heat resistant-as I put an oven dish (from a 180 degree over) as a test on a 5mm ‘coaster’ no marks or effectConsVery bubbly-sometimes almost frothyShrinks lots!!! Absolutely no good for doming-I use a top coating heat resistant resin for my coastersVery runnyLots of bubbles that still keep coming up.Seems to have an amine blush-so doesn’t dry like glass-no idea what it does this 🤷🏽‍♀️Did I mention the bubbles 😬Otherwise it’s a great product for doing the bulk of work (coasters/wine butlers/key-rings/beach artwork) and then use a high grit sand paper to remove top layer and use a ‘better quality’ resin to finish your work.

Good stuff, takes a while to dry, but I wanted a long cure time. Very strong and have used this for sadness and crafting. Excellent product that clears easily with a hair dryer

I read this was heat resistant but it isn’t. I made coasters and after 3 days I stood cups of tea on two to test them and the cups stuck to the coasters a bit and left a ring mark on them.Its lovely resin yo work with. Quite runny so easy to pour and slightly longer time to work with. Gives a clear Shiny finish and very few bubbles which are easily removed with a flame.

So far this service as been top class.arrived on time .so far I’ve used this epoxy and it mixed up lovel it poured out nice and with hardly any bubbles .i just gave it a quick going over with the blow torch.although I won’t see the result till tomorrow I’m confident that’s it’s gonna turn out clear as day.if it don’t you will see another review attached to this telling you if otherwise.ive saved this seller aswell.they are the cheapest out there anywhere really.i couldn’t find much to contend with this in every compartment.its got value.its good product,and it’s contained nicely aswell.these will be my suppliers from now on 👏👏👏👏

So I was really excited to try this resin as I was looking to replace my current resin. On opening the hardener I noticed a faint amonia smell and I was concerned that it would be quite odorous when mixed. I needn't have worried, it is very low odour almost none at all. It has a very runny consistency and is very easy to mix with very few bubbles. It is a bit tricky to pour accurately from the large square bottle but easily fixed. So far so good! I mixed colour in half and the other half clear. I made a lovely zebra print effect, debubbled and left it to cure. The next day all the colour had settled to the bottom with no pattern.(See pic) When I polished it up it left a white residue in places. Thought I must have done something wrong, I'll try again. Next poured with mica powder. It changed the bright pink to almost an orange (see pic, bright pink shapes for comparison) All mica poured together one colour sank and left a frothy patch on top. Poured again with unpredictable colour results and a frothy patch that remains a bit tacky. Almost like all the bubbles gathered together while curing. I decided that I would only use it clear but the frothy patch has remained. I have given it fair chance and it has left me very disappointed. It does cure glass clear (except the frothy patch) and it's very easy to mix. I have also mixed it by both volume and weight successfully and with no difference. I know others have had success but I have not unfortunately.