🌬️ Quiet power, smart control — breathe easy with Airflow® QT100T!
The Airflow® QT100T is a German-engineered, QuietMark-certified extractor fan featuring two-speed airflow up to 25 L/s, ultra-quiet 25 dB operation, and smart auto start with adjustable timer settings. Energy efficient at just 5/9 watts with IP45 water and dust protection, it offers long-lasting durability with 40,000+ hour ball bearings and complies with all relevant building regulations. Compact and stylish, it comes with a 3-year warranty, making it the perfect upgrade for modern, eco-conscious bathrooms.
Manufacturer | Airflow |
Part Number | QT100T (9041260) |
Product Dimensions | 13 x 14.7 x 14.7 cm; 716.68 g |
Item model number | 9041260 |
Size | 100 mm |
Colour | White |
Style | Timer |
Finish | Polished |
Power Source | Corded Electric |
Voltage | 230 Volts |
Wattage | 9 watts |
Item Package Quantity | 1 |
Number of Pieces | 1 |
Air Flow Capacity | 25 L/sec |
Sound level | 25 dB |
Blade length | 100 Millimetres |
Speed | 25 dB |
Switch style | Timer |
Special Features | ● IP45 Rated ● Two Speed Options ● Building Regulations Certified ● Long Life 40,000+ Hours ● Back Draught Shutter, ● 3 Years Warranty ● Made in Germany ● Auto Start ● Adjustable Timer Control ● QuietMark Certified ● Low Power (5Watts) ● Low Noise 25dB |
Included Components | User Manual, Screws, Extractor Fan, 3 Years Warranty |
Batteries included? | No |
Batteries Required? | No |
Item Weight | 717 g |
J**S
The ideal bathroom/lavatory extractor.
Easy to install and is quiet and very powerful. Setting up the options for the timer and other preferences is difficult because the switches and labelling are so small that much better than 20/20 vision is essential - or a magnifying glass. The downside is the backdraught shutter which clatters in a high wind to such an extent that I fitted foam rubber to quieten it. This means it leaks cold air into the room in a high wind, but the noise of the shutter would otherwise be intolerable. (All backdraught shutters are like this, so it's not so much a criticism of the fan as of the inability of fan makers to come up with anything better than this.) I have fitted a cowl on the outside of the house and this is a great help. But I must emphasise that this is the best extractor of its size I have ever used, and remarkably quiet.
S**4
Looks good and excellent extraction rate
There were no problems with delivery and the unit arrived within expected dates. I replaced like for like. So the installation was fairly straightforward. The original Airflow 30 lasted for 7 years. I think it would have lasted longer if I had carried out more regular maintenance by carefully cleaning the rotary blades every 3 months or so. The use of baby powder after a shower is the main problem. The fan is more expensive than other fans, but it has neat styling, no back draught when closed, and very good extraction power. On the down side you have to purchase a separate timer unit if you want the fan to continue operating after it is switched off. The timer from my original fan worked without any problems. If you are thinking of replacing an existing 100mm fan, just be aware that the hole diameter in the ceiling will need to be increased, although the fan still connects to a 100mm flexible extraction hose. Do your own research are check out installation videos.
P**N
Excellent fan, maybe just unlucky that the first one failed.
This is superb. Wanted to replace a noisy 100mm fan during a bathroom refurb. This 120mm unit extracts loads of air, is very quiet, and also looks neat. Has a 2-minute delay, which is good, so doesn't go on every time you make a quick visit. Plus a humidistat, I now have a 2m square wet room without windows, and when when I'm done, I turn off the light, the atmosphere is back to normal within 2-hours, and the room feels dry and airy.Revised my review from 5 to 4 stars, as the fan failed after 18-months of use. Just wouldn't come on, and the room stayed warm and stuffy. Interestingly, the original fan actually got quieter over time, to the point where I sometimes removed the cover plate to check it was still working. It usually was, until it wasn't. Bought a replacement so easy to swap, four screws and 3 push-in wires. Maybe just unlucky with the original and the replacement may last for 20-years?!? Annoying that the replacement (via Electricals247) had all four plastic clips broken on the cover plate. I could use the original cover instead, but a broken product should not have been dispatched. The rattling in the box was a clue!
H**M
Inherent material defect.
DON'T BUY THIS. Requires an extremely large hole in your wall and it is very noisy. However, it went dead after just 2 years. Contacted the manufacturer (as within the 3 years warranty) who asked me to do some tests. Appears, the problem is with the motor. They asked me to send it in. They would do tests and fix if possible etc etc and could take over 2 weeks. What am I supposed to do with the big hole on the wall? To avoid all the fapping around, I took it off the wall and dismantled it. Looks like the plastic they use is cheap and the two screws holding the motor to the unit had broken off the plastic and lodged the motor unit to the casing. The plastic used is flimsy and not fir for the purpose. This is surely an inherent defect known to the manufacturer. Will be looking for an alternative but the hole in the wall will be too big and so will have to re-tile that section. What a waste of money.
R**R
Very quiet and easy to fit
Good quiet replacement for a fault unit
A**T
Once bitten………
I have purchased two of these. The first lasted about six years before it became unacceptably noisy. Discovered the impeller had come loose on the shaft. Contacted Icon who said they do not supply spares and the fan cannot be repaired. Ordered a replacement which has lasted 18 months before it also became noisy and vibrational. Will not be purchasing a replacement and have opted for an alternative premium make which is significantly cheaper.I have the smaller model fitted in a toilet about 15 years ago which is quiet, but not particularly effective.
M**D
Lovely and powerful
This fan is quite, quite excellent: When taking a shower, the humidity module (I installed this fan with the humidy-and-timer module, purchased separately but also from Amazon) automatically turns on the fan and by the time I step out of the shower the fan has extracted enough humidity from the bathroom that the mirror isn't even steamed up. This is in a 4m x 4m bathroom. Also, the slowly opening and closing iris mechanism has a delightful look to it.One word of caution: while the fan can be fitted surface-mounted using the "contoured skirt" provided, it looks rather ugly, protruding from the wall by about 9cm or so. To look good, it really needs to be fitted flush to the wall. In my case, that involved removing a chunk of wall around the existing vent hole to provide enough space for the fan's motor housing to be seated inside (15cm across by 8cm deep). Since every local builder I approached had core drills which could only cut a NEW vent hole, rather than widening an existing one, that meant a few hours work myself with cold chisels, brick bolsters, masonry drills and a masonry hammer.Definitely worth doing, however, as the fan now looks good and works extremely well.
Trustpilot
1 month ago
1 day ago