Replacement Gas Can Spouts Improved Design Gasket Flexible Pour Nozzle with Vent Cap for Older Gas Can Fuel Water Jug 1 2 5 Gallon White

Nice items to have around, good quality, does the job for which intended.

When I saw the box, I was like this doesn't look good. But the kit had everything I needed. I drilled the hole for the vent caps and they popped right in. Then I screwed the spouts on my 5 gal. cans. I went straight to the gas station and filled my cans. I had my cans tied down, but my rope broke. Both cans fell over, on their sides. There was a small amount of leakage around the vent, so they're not air tight. I use the cans to fill my boat, pouring into a funnel. The flow from the cans is way better than the safety caps that were on my cans. You get what you pay for, and for the price, not bad.

The nozzle and the adapters fit perfectly. My cans work like gas cans used to work. The only issue is that there were only 2 rubber gaskets for the vent caps instead of 3. Not going to request a return or a credit because of this, but it would be great if you could send another gasket.

A must have if you are tired of the regulation spouts leaking and binding up to where they are not usable. Why did I wait so long to get these?

Perfect fit, easy to install, I will buy again

The rubber gaskets are too soft and all tore on the first use - they did not chemically degrade, they physically crushed and tore. They had to be tightened fairly hard to stop leaking, but doing so tore them and they all fell apart when unscrewed to refill. Which made each spout effectively one-time-use. And thus essentially useless to me. The spots are also too stiff to easily bend for stowage. The flat plastic blanking cap is cleverly designed to also screw onto the spouts as a gas cap when the spouts are installed, but lacks a gasket and thus cannot be used as an actual blanking cap while the tanks are filled; the only way to transport is with the spouts installed. The spouts are flexible enough to be FAR easier to use for filling gas tanks than some of the EPA-compliant spouts, but are still fairly stiff. This makes them resilient to accidentally crushing, but also inconvenient when trying to bend them out of the way for transport.The kit was nice; the included screw caps were compatible with all three of the different brand/model big-box gas cans I used it with. It came with a drill bit for the air vents (which MUST be installed for these to work properly). However the drill bit was oversized for the supplied vents and they don't properly seal. I used a smaller drill bit with better results.

Caps supplied are have too small of an opening on the top for the spouts to fit though. Tried using my original cap with the new spout but it leaks like crazy! Going to try sanding the supplied caps to see if i can make the spout fit and hopefully it wont leak. Also the drill bit included is a little large for the vent cap. It snaps in but when you go to open the cover, the whole vent cap wants to fall off.Edit: Sanded the inside of the cap and got the spout to fit and found the leak. The gaskets supplied are WAY too soft and too thin. It shredded to bits. Used the gasket off my original spout and now it fits great and has no leaks!

These gas can spouts are well-made. They see firmly and do not leak. I would buy them again.

saved some gas cans

Have been looking for a product like this for a while. They work on the 3 different types of gas cans that I own.

Parts came in a timely fashion

works great no more spilling gas filling lawn mower

good