Plastic Under Seat Storage for 2014-2019 Toyota Tundra CrewMax

Model specific: Installed on a 2021 Tundra. The foam under the carpet was pliable, easy to cut through with an old serrated steak knife, and easy to pry up with just a long wrench. For the middle compartment, I was able to just cut the back and sides, and pry it up from the back to break the foam at the front without having to cut anywhere near the remote start cable.I hope the photo of the remote start cable helps others know what they’re trying to avoid cutting because I went in blind and worried. Overall, I’m very satisfied. Project took me just over an hour including cutting out the template, and the entire project was fairly easy to do.The template on the box appears to be hand traced from a master template instead of printed on with a precise print. After cutting out your template, I highly recommend comparing your cut out template with the actual product so that you can make adjustments as necessary when marking your carpet for cutting. My template fit perfect laterally for all the compartments, but left approximately 2 centimeters of wiggle space on the anterior and posterior sides.Overall, the product added functional storage where there was none prior, and the product was solid and built well. It looks OEM once installed, and the seats sit flush with the top of the compartments once the seats are folded down.

Installation is easy. Be sure to “measure twice and cut once”. Added storage space is great.

As others likely have and will I as well hesitated with needing to cut into carpet and foam with no recourse, but once you get over that there's little to it and the result is 100% worth it. The included template on the box makes marking the cuts easy with a bright marker, then use a metal ruler and utility knife to cut through the carpet and insulation layers. Once you have these cut, a fine-tooth saw such as the one included with my Stanley 3-In-1 Saw Set can be used to cut through the foam layer (use caution with the center cutout if you have a remote-start equipped vehicle to avoid cutting through the wires or module). After making the cuts with the saw blade run the metal ruler down and through the cuts in the foam again to separate the form, then just pry the cut foam sections out and vacuum up the debris. You can lay the previously-cut carpet and insulation pieces back in the holes where you removed the foam for some temperature- and sound-insulation, then just set the tray in to place. Really couldn't be easier for something that should have been included from the factory, and adds some much-needed storage to the otherwise massive CrewMax cabs.

Read the reviews and I can agree, this is a must have for your tundra that lacks storage space. I have a 2021 Tundra Limited crew cab. Since I have a push bottom start, there is an extra cable you need to be careful when cutting out the center storage bin foam. Utility knife works fine on the carpet, but a vinyal knife works best on the foam. Follow the template and rest is easy. My recommendations, trace the cuts with chalk on to your carpet, jut to make sure everything aligns before you cut. This review is written 1 year after I installed and everything still works/looks great. Use it all the time to store items.

I was skeptical about cutting holes in my truck but it turned out great. My only regret is that I didn’t install this sooner.

The media could not be loaded. Was concerned about the push start and wire harness in the middle compartment.Everything worked out great and fit perfectly.Love the extra storage and ability to store further back under the seat.Only wish is there was more storage space, would be nice to have one large bin rather than split into 3 separate bins.

Awesome storage for the 2.5 Gen Tundra

Easy to install. And adds much needed storage.