PACEWALKER Universal Modification Motorcycle LED LCD Speedometer Digital Odometer Backlight for 1,2,4 Cylinders for Honda Ducati Kawasaki Yamaha(Professional Installation Required)

If youve wired anything before or have general automotive repair knowledge then this is not that hard. its a little condusing because the insructions are poor but if you have a 150cc gy6 heres your explanations. just color match most of the wires on the first 9 pin connector except for the blue and white wire. from the fuel sensor connect the yellow and white to the gauges blue and white. and from the sensors blue and white connect that to a power source like one of the black wires that are free. and then green to green(ground). after that with the key off hold the button on the cluster and while holding that switch the key on and hold for 5 seconds. then you will enter the clusters back menu which lets you alter certain settings that you cant do otherwised

According to the title/description this tachometer/speedometer works for 1, 2 or 4 cylinder motorcycles. The tachometer will NOT work for a 1 cylinder motorcycle. The description is simply wrong. It will will only work for 2 and 4 cylinder motorcycles. Unfortunately I didn't figure this out until the return period had already expired.

used this to upgrade my GTI jetski to full digital panel. worked GREAT. even speedo worked. used the original magnetic impeller and just used 4200 to glue the pickup right above the original pickup, wala.. i got speed. i had to set the pickup to 8 magnets and 30cm or something like that.. smallest i could get it, then just adjusted the mag counter until the speed was right. wala. also used temp sensor on the water output from the engine, and the tach went right to the origanal tach line. check engine light works in reverse for seadoo, so with this thing, light on is a good thing. i also use my jetski's in salt water, and this thing is still going strong.. no water leaks at all.. and trust me when i say this, because i get it VERY WET.. i mean, i've had this thing 3 to 5 feet under water several times per trip.

Seller provided Instructions in MS Word - The Document was in Chinese, Painfully translated the document and 80percent made no sense. I was able to determine the Power On and the speedo input. One thing to take note is there are red LED lights at the top that flash outward whenever the magnetic speed sensor is triggered No way to turn them off Black tape could be used to block them from sight. While this seems well made I am returning this item seems like a Beta release. If they provided proper instructions and the mating connector with pigtail leads it may be worth it.

You definitely would have to figure out what wire is what but once you do the rest is easy

There is no adjustment at all for OHM resistance so that the temperature or fuel gauge report correctly. There is not enough adjustment in the number of magnets or size of tire to use OEM speed sensor, you are required to install the provided speed sensor. If the sun rises that day, you will not be able to see the screen due to the glare from the screen covering. The turn signal indicators did work, so there's that...

I'm in the process of a build on a 1 seater buggy with a 400 2 stroke on a old Chinese go-cart frame and thought having a digital display would be cool and don't get me wrong, it is but this wasn't exactly what I wanted. The screen is bright enough when not in direct sunlight.The gas gauge is really odd, I mean odd 90 empty and 14 or less full is odd and vary hard to find a sending unit that works with it. I ended up buying a gas gauge for it. The water temp gauge is right for the polaris 400 temp sensor (I got lucky there) but unfortunately the tachometer will not work with single cylinder engines. It kinda disappointing but I really bought it for a speedometer.I will give updates once i know how setting it up goes I'm not ready and won't for a few weeks. But I will be back to set you know

Looks great and all but the instructions need to be a bit more clear. As well the sellers to be more specific on what bike it can go. Just to pull it on my suzuki katana 93 I need to do a lot more plug and play. I gave it to a friend and worked perfect for him since he had a newer motorcycle