Axel Joost Vari Load - Adjustable Flasher Relay

Description

The scenario is known: you have installed the beautiful LED indicators in your bike and since then the flashing speed is no longer correct, or the ECU makes error messages because the indicator relay or ECU does not cope with the lower power of the new indicators or thinks that your indicator is broken. Now you could the accessory market Order different load equalizers, pay and test and solder on your bike until you have found the right value. This is our digital adjustable charging qualiser with 50 adjustable power values. The Vari Load adjusts the right resistance itself. The Vari Load also has an automatic mode and can determine the necessary load with conventional flashing relays. Clamp the blue cable before turning on the ignition against ground. After you turn on the ignition and activate the indicators, the Vari Load measures the flashing frequency and slowly increases its load. Once a flashing frequency of 90 flashes/minute is reached, the Vari Load stops its measurement and stores the load value firmly. Now you can remove the blue cable from mass and the stored value is retained in the device. The Vari Load is also a cool tool for the workshop and belongs in any toolbox. You can easily adjust the necessary load for the indicator relay via the device and then against the required resistance value from the table on page 2 of the InReplace installation instructions (English language not guaranteed). Details: dimensions: 56 mm x 36 mm x 17 mm without mounting tabs. Housing: black ABS, with 2 K casting compound. Input voltage: 8 - 15 V. Connections: program cable 0.14 mm², lead is part 0, 75 mm². Installable load range: between approx. 2 x 1 watt and 2 x 10 watts in approx. 0.2 watts. Maximum ambient temperature: 90 degrees Celsius