Omix-Ada | 17215.01 | Dash Clock | OE Reference: 5761330 | Fits 1976-1986 Jeep CJ7 / CJ8, White

Seems to work great. Well lit and as far as I can tell reads pressure accurately. Of course at this price it does not come with a sending unit.

This gauge is not as pictured at all but does work good. There is a picture from another reviewer above. remove the metal "U" mount on back push the gauge through dash on mine it was little hard to push through but it did go through then after connecting wires put the u mount on to hold it in place. I have a 78 jeep cj the wires were not in the same place on this gauge as the original so make sure you check that. the positive cable was on the opposite side as the original so check this it has a + mark and the center nut is the negative it is marked don't just connect it like the old one. Also the original light will not work with this gauge but it does have light wires you can connect to old light wires.

Worked well for me

At first i was upset that i had recived the wrong part but then after a day of customer service they send me the right one or so i thought it has the same number but its a junk plastic cheap gauge that doesnt match the one i already have at all its so ugly i dont even want to use it and it wont hook up to my jeep without cutting up my existing wires

Worked great with oe pressure transducer. Connections have to be changed, made of plactic unlike the oem one. Gauge dept is also different than oem.

This is an older version of the Omix-Ada. Thought I'd save some money here but not worth it. The light on the back is horrible. Only one positive wire coming out of the back of the bulb housing, so it grounds through the case. Except the ground wire for the gauge is isolated from the case so the bulb won't function. Plus, the bulb that comes with it won't make good contact in the bulb housing anyway so after fixing the grounding problem I found the bulb still didn't work from a bad connection in the bulb housing.Its also extremely dim even when properly grounded. I had to swap out the bulb for a different one and bend contactors around in the bulb housing for it to properly ground.Finally, the voltage gauge is off, 2 fluke testers prove that point. At 14.3 volts (engine running) the gauge hits 16 volts. I would stay away from this and find the newer version elsewhere. The newer version has two spade contactors on the bulb housing and its a twist on. This one is a push in.

The gauge is not what was shown in the picture, or what they showed in the picture. The gauge I received had a metal bracket instead of the plastic one people were talking about not working. The metal on should work as required. The bezel on this is black I was expecting chrome like factory cj5 gauges. I haven't hooked it up yet I will in the next day and will update review after I did.

The meter is visably smaller that the original part. There are no markings on the back to indicate where the power lead goes on. The part that secures this to the dash is now made out of plastic instead of metal like the original one. This would not be a problem but the light will not work without running a negitive lead to the illiumination bulb. AT least it came with a bulb and a lead to connect the positive to the wireing harness. The plastic bracket is not long enough to tightly secure the guage to the dash without creating a spacer and fitting that spacer behind the guage then attaching the plastic bracket to hold the guage to the dash.

Came with fog inside glass...also a black hair inside it, which was kinda gross. Haven't tried to connect it yet, just opened the package so far. Arrived promptly though, will assume it works, else will drop my rating. Price was right.

He leido opiniones algo negativas de este producto, pero a mi me parece con buena apariencia y de buena calidad, definitivamente lo recomiendo

Clock fits and looks great but in Abel to set the time as adjusor does not reach properly

Fits and works great

Does not match the picture as described is a totally different oil pressure gauge